- Descrizione
- Brand
Descrizione
Celestion – CDX1-1742 50W 8ohm – HF Compression Driver – Ferrite
Driver a compressione con magnete in ferrite, uscita da 1, potenza 50Watt, impedenza 8ohm,
diaframma in polymide (poliimmide), fissaggio con viti (bolt).
Caratteristiche
-2,000Hz recommended min. crossover freq (12dB/oct)
-Single piece polyimide diaphragm and surround
-Sound Castle soft clamping diaphragm assembly
Specifiche Generali
Power rating(1): 50Wrms
Continuous power rating(2): 100W
Nominal impedance: 8ohm
Frequency range: 1200-20,000Hz
Sensitivity(3): 107dB
Recommended min. crossover (12dB/oct): 2,200Hz
Voice coil diameter: 44mm/1.75in
Voice coil material: Edgewound copper clad aluminium
Magnet type: Ferrite
Diaphragm material: Polyimide
Surround material: Polyimide
Informazioni di Montaggio
Width: 100mm/4in
Depth: 53.5mm/2.1in
Weight: 1.43kg/3.1lb
Fitting: Flange (2/3 M6 holes on 76/57mm, 3.0/2.24in PCD)
Throat exit: 25mm/1in
Trombe Compatibili
H1-9040P , H1-7050 “No Bell”
Note
(1)Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
(2)Continuous Power Rating is defined as 3dB greater than the AES rating.
(3)Measured on axis at 1W, 1m, using typical horn, in 2pi anechoic environment.
Per stampare la scheda prodotto, clicca qui
Per una panoramica su tutta la serie Celestion CDX Ferrite, clicca qui
Per consultare e scaricare la brochure originale Celestion Pro Audio, clicca qui